Disk Overseeding Machine

This overseeding machine allows you to perform your over-seeding operations optimally. Each disc/injector unit produces a clean cut and a precise deposit of seeds. This unique design allows us to offer you a compact machine with a limited weight allowing the selection of a tractor with less lifting capacity.

The cutting of the groove is carried out by sharp discs, arranged on independent blocks that follow the profile of the ground. The injectors place the seeds precisely in the furrows.

The precision seeding, from the stoloniferous bent grass to the classic English ray-grass mixtures, is obtained by the volumetric adjustment of the spline dispenser via the dial clock.

The rear roller then closes the grooves.

• Precise seed deposition by the disc/injector unit


• Clean cut by sharp discs


• Precise dosing of seed quantities with the spline seed drill


• Stainless steel seed drill with spline dispenser


• Precise adjustment of the rear roller


• Tank drain funnel


• Calibration device

WORKING WIDTH	1500 mm (59")
TOTAL WIDTH	1760 mm (69" 1/4)
WEIGHT	665 Kg (1466 lb)
TRACTOR: REQUIRED POWER	From 30 Hp (Check the lifting capacity of the tractor)
SEEDING DEPTH	0 to 20 mm (0’’ to 3/4’’)
INTERVAL BETWEEN SOWING	60 mm (2’’ 1/4)
NUMBER OF DISCS	24
DEPTH ADJUSTMENT	3rd point + roll
3 POINT HITCH	Categories 1 & 2
TRANSPORT DIMENSION (MM)	1760 x 1010 x 1490 (69’’ 1/4 x 68’’ 3/4 x 39’’ 3/4)
TYPE OF SEED DRILL	Stainless steel seed drill by spline distributor
SEED RATE ADJUSTMENT	Adjustment clock 0 to 12 o'clock
SEED RATE CALIBRATION	From 2 to 30 g/m²
SEED DRILL CAPACITY	139 liters (37 US gal)